|
Sr. No.
|
RTIME 2K19 , ISSN: 2321-9637 (Online)
Published By: MG Aricent Educational Foundation
|
Page No.
|
| 1 |
| Author |
Karuna Kumar .G, Dr. B. Karuna Kumarb, Dr. Kesava Rao V. V. S |
| Paper Title |
An integrated method for the quantity to be ordered to supplier |
| DOI |
- |
| How to Cite |
Karuna Kumar .G, Dr. B. Karuna Kumarb, Dr. Kesava Rao V. V. S. (). An integrated method for the quantity to be ordered to supplier. International Journal of Research in Advent Technology,
(), 1-9. https://doi.org/- |
|
1-9 |
| 2 |
|
10-15 |
| 3 |
| Author |
A. Vamsi Krishna, Dr. G. Janardhana Raju |
| Paper Title |
Structural And Modal Analysis Of Two Wheeler Shock Absorber |
| DOI |
- |
| How to Cite |
A. Vamsi Krishna, Dr. G. Janardhana Raju. (). Structural And Modal Analysis Of Two Wheeler Shock Absorber. International Journal of Research in Advent Technology,
(), 16-20. https://doi.org/- |
|
16-20 |
| 4 |
| Author |
Lakshmigalla Sunil Kumar, ch Soundarya , telkar Mahesh, jagilam Kumar Chandra |
| Paper Title |
Flow Simulation Analysis of Horizontal Wind Turbine Rotor Blade |
| DOI |
- |
| How to Cite |
Lakshmigalla Sunil Kumar, ch Soundarya , telkar Mahesh, jagilam Kumar Chandra. (). Flow Simulation Analysis of Horizontal Wind Turbine Rotor Blade. International Journal of Research in Advent Technology,
(), 21-36. https://doi.org/- |
|
21-36 |
| 5 |
|
37-41 |
| 6 |
| Author |
Telkar Mahesh, Lakshmigalla Sunil Kumar, jagilam Kumar Chandra |
| Paper Title |
Design and Analysis of a Multipurpose Jig in Machine Tool |
| DOI |
- |
| How to Cite |
Telkar Mahesh, Lakshmigalla Sunil Kumar, jagilam Kumar Chandra. (). Design and Analysis of a Multipurpose Jig in Machine Tool. International Journal of Research in Advent Technology,
(), 42-51. https://doi.org/- |
|
42-51 |
| 7 |
|
52-57 |
| 8 |
| Author |
G.Gopi, Dr.B.Raghava Rao |
| Paper Title |
Effect of Back Pressure on Nozzle Flow |
| DOI |
- |
| How to Cite |
G.Gopi, Dr.B.Raghava Rao. (). Effect of Back Pressure on Nozzle Flow. International Journal of Research in Advent Technology,
(), 58-64. https://doi.org/- |
|
58-64 |
| 9 |
| Author |
A.Venkata Vishnu, Jijo Sam, K Praveen kumar, D Praveen, B Vishnu, G Aravind |
| Paper Title |
Optimization of Process Parameters in Machining of Alloy Steel Using Nano Fluids |
| DOI |
- |
| How to Cite |
A.Venkata Vishnu, Jijo Sam, K Praveen kumar, D Praveen, B Vishnu, G Aravind. (). Optimization of Process Parameters in Machining of Alloy Steel Using Nano Fluids. International Journal of Research in Advent Technology,
(), 65-70. https://doi.org/- |
|
65-70 |
| 10 |
|
71-78 |
| 11 |
| Author |
Mr.B.SAI VENKATA KRISHNA, Dr.S.CHAKRADHAR GOUD |
| Paper Title |
CFD and Heat Transfer Analysis of Air Craft Gas Turbine Blade |
| DOI |
- |
| How to Cite |
Mr.B.SAI VENKATA KRISHNA, Dr.S.CHAKRADHAR GOUD. (). CFD and Heat Transfer Analysis of Air Craft Gas Turbine Blade. International Journal of Research in Advent Technology,
(), 78-84. https://doi.org/- |
|
78-84 |
| 12 |
| Author |
Mr.B.SAI VENKATA KRISHNA, Mr.K.MADHU BABU |
| Paper Title |
Green Manufacturing Methods-A Review |
| DOI |
- |
| How to Cite |
Mr.B.SAI VENKATA KRISHNA, Mr.K.MADHU BABU. (). Green Manufacturing Methods-A Review. International Journal of Research in Advent Technology,
(), 85-88. https://doi.org/- |
|
85-88 |
| 13 |
| Author |
Dr. A. Raj Kumar, Dr. G. Janardhana Raju |
| Paper Title |
Design of Dual calipers for High-speed Vehicles |
| DOI |
- |
| How to Cite |
Dr. A. Raj Kumar, Dr. G. Janardhana Raju. (). Design of Dual calipers for High-speed Vehicles. International Journal of Research in Advent Technology,
(), 89-93. https://doi.org/- |
|
89-93 |
| 14 |
| Author |
Prajwalkumar M. Patil, Mallikarjun B. Koujalagi, Krishna Toli |
| Paper Title |
Modeling, Analysis & Fabrication Of Quadcopter (UAV) With Payload Drop Mechanism |
| DOI |
- |
| How to Cite |
Prajwalkumar M. Patil, Mallikarjun B. Koujalagi, Krishna Toli. (). Modeling, Analysis & Fabrication Of Quadcopter (UAV) With Payload Drop Mechanism. International Journal of Research in Advent Technology,
(), 94-104. https://doi.org/- |
|
94-104 |
| 15 |
|
105-109 |
| 16 |
|
110-113 |
| 17 |
| Author |
K.SURESH KUMAR, A.N.S.SATYA PRASAD, A.HARI KRISHNA, A.SIVA KRISHNA, D.CHANDRA SHEKAR, M.VENKATESH PRASAD |
| Paper Title |
Investigation on Performance of Diesel Engine with Tyre Pyrolysis Oil |
| DOI |
- |
| How to Cite |
K.SURESH KUMAR, A.N.S.SATYA PRASAD, A.HARI KRISHNA, A.SIVA KRISHNA, D.CHANDRA SHEKAR, M.VENKATESH PRASAD. (). Investigation on Performance of Diesel Engine with Tyre Pyrolysis Oil. International Journal of Research in Advent Technology,
(), 114-123. https://doi.org/- |
|
114-123 |
| 18 |
| Author |
B. Naga Rupesh, D. Ramachandra Reddy, S. Sharath Kumar, SD. Waseem Aqther, K.Valu Nayak, Harinadh Vemanaboina |
| Paper Title |
Experimental study for dissimilar joints using CO2 laser welded butt joints |
| DOI |
- |
| How to Cite |
B. Naga Rupesh, D. Ramachandra Reddy, S. Sharath Kumar, SD. Waseem Aqther, K.Valu Nayak, Harinadh Vemanaboina. (). Experimental study for dissimilar joints using CO2 laser welded butt joints. International Journal of Research in Advent Technology,
(), 124-128. https://doi.org/- |
|
124-128 |
| 19 |
| Author |
Kuruva Veerakanth, T. Rajashekar, B. Saikumar, K. Venugopal, B. Ranjith Kumar, M. Venkateshwarlu |
| Paper Title |
Distortion measurement for Laser Beam Butt Welded Joints |
| DOI |
- |
| How to Cite |
Kuruva Veerakanth, T. Rajashekar, B. Saikumar, K. Venugopal, B. Ranjith Kumar, M. Venkateshwarlu. (). Distortion measurement for Laser Beam Butt Welded Joints. International Journal of Research in Advent Technology,
(), 129-133. https://doi.org/- |
|
129-133 |
| 20 |
| Author |
G Gopi, Dr.B.Raghava Rao, M.Poojitha |
| Paper Title |
CFD Analysis on Convergent Nozzle |
| DOI |
- |
| How to Cite |
G Gopi, Dr.B.Raghava Rao, M.Poojitha. (). CFD Analysis on Convergent Nozzle. International Journal of Research in Advent Technology,
(), 134-141. https://doi.org/- |
|
134-141 |
| 21 |
| Author |
Harinadh Vemanaboina, K.B.G. Tilak, M. A. Salman Hussian |
| Paper Title |
Effect of Heat Input on Tensile Strength of Multipass SS316L Using GTAW Process |
| DOI |
- |
| How to Cite |
Harinadh Vemanaboina, K.B.G. Tilak, M. A. Salman Hussian. (). Effect of Heat Input on Tensile Strength of Multipass SS316L Using GTAW Process. International Journal of Research in Advent Technology,
(), 142-145. https://doi.org/- |
|
142-145 |
| 22 |
| Author |
A.Venkata Vishnu, V.Anvesh, P.Karrthik, T.Rakesh, H.Shivaprasad, J.Linga swamy |
| Paper Title |
Optimization of Process Parameters in Machining of Alloy Steel Using Vegetable oil |
| DOI |
- |
| How to Cite |
A.Venkata Vishnu, V.Anvesh, P.Karrthik, T.Rakesh, H.Shivaprasad, J.Linga swamy. (). Optimization of Process Parameters in Machining of Alloy Steel Using Vegetable oil. International Journal of Research in Advent Technology,
(), 146-151. https://doi.org/- |
|
146-151 |
| 23 |
| Author |
K B G Tilak, S Satish |
| Paper Title |
Flow Simulation of Radiating Blower by Using Solid Works |
| DOI |
- |
| How to Cite |
K B G Tilak, S Satish. (). Flow Simulation of Radiating Blower by Using Solid Works. International Journal of Research in Advent Technology,
(), 152-162. https://doi.org/- |
|
152-162 |
| 24 |
| Author |
N. Chandra Kanth, Gangakhedkar Sujith, Byrishetty Abhishek, Gattikoppula Karthik, Garikapati Vamshi krishna, Malothu Rajender |
| Paper Title |
Extraction of Producer Gas from Solid Fuel |
| DOI |
- |
| How to Cite |
N. Chandra Kanth, Gangakhedkar Sujith, Byrishetty Abhishek, Gattikoppula Karthik, Garikapati Vamshi krishna, Malothu Rajender. (). Extraction of Producer Gas from Solid Fuel. International Journal of Research in Advent Technology,
(), 163-165. https://doi.org/- |
|
163-165 |
| 25 |
| Author |
Dr.G.Amarendar Rao, Dr.K.Neelima Professor, Dr. S Rajasekaran, G. Pranathi |
| Paper Title |
Dr.G.Amarendar Rao, Dr.K.Neelima Professor, Dr. S Rajasekaran, G. Pranathi |
| DOI |
- |
| How to Cite |
Dr.G.Amarendar Rao, Dr.K.Neelima Professor, Dr. S Rajasekaran, G. Pranathi. (). Dr.G.Amarendar Rao, Dr.K.Neelima Professor, Dr. S Rajasekaran, G. Pranathi. International Journal of Research in Advent Technology,
(), 166-170. https://doi.org/- |
|
166-170 |
| 26 |
|
171-179 |
| 27 |
|
171-179 |
| 28 |
| Author |
Jagadish.Manakur, Raghavendra N Savannanavar,G.Venkata Ganesh, K.Mohd Nauman Ahmed, K.Jayanth, Yogeshwar Reddy, Krishna Teja |
| Paper Title |
Finite Element Analysis of Hydraulic Press Emphasis with Minimum Deformation and Thickness Optimization |
| DOI |
- |
| How to Cite |
Jagadish.Manakur, Raghavendra N Savannanavar,G.Venkata Ganesh, K.Mohd Nauman Ahmed, K.Jayanth, Yogeshwar Reddy, Krishna Teja. (). Finite Element Analysis of Hydraulic Press Emphasis with Minimum Deformation and Thickness Optimization. International Journal of Research in Advent Technology,
(), 180-191. https://doi.org/- |
|
180-191 |
| 29 |
|
192-198 |
| 30 |
| Author |
G.Guruvaiah Naidu, D. Sree Charan, Deshpande Anush, K.Hima Sai Vardhan Reddy, D.Venkata Sai Sanjay |
| Paper Title |
Experimental Investigation on MIG Welding For Mild Steel |
| DOI |
- |
| How to Cite |
G.Guruvaiah Naidu, D. Sree Charan, Deshpande Anush, K.Hima Sai Vardhan Reddy, D.Venkata Sai Sanjay. (). Experimental Investigation on MIG Welding For Mild Steel. International Journal of Research in Advent Technology,
(), 199-205. https://doi.org/- |
|
199-205 |
| 31 |
| Author |
Jukanti Vishwas , Matavalam Hariprasad, Krishna Toli |
| Paper Title |
Design and Analysis of Plough for Agricultural Mechanized Robot |
| DOI |
- |
| How to Cite |
Jukanti Vishwas , Matavalam Hariprasad, Krishna Toli. (). Design and Analysis of Plough for Agricultural Mechanized Robot. International Journal of Research in Advent Technology,
(), 206-211. https://doi.org/- |
|
206-211 |
| 32 |
|
212-216 |
| 33 |
|
217-223 |
| 34 |
|
224-230 |
| 35 |
| Author |
P.SRINIVAS |
| Paper Title |
Torsional Strength of Composite Drive Shaft |
| DOI |
- |
| How to Cite |
P.SRINIVAS. (). Torsional Strength of Composite Drive Shaft. International Journal of Research in Advent Technology,
(), 231-135. https://doi.org/- |
|
231-135 |
| 36 |
| Author |
A. Prashanth, B. Satish kumar, Dr. G.Janardhana raju |
| Paper Title |
Scheduling In Flexible Manufacturing System by Considering Two Objectives |
| DOI |
- |
| How to Cite |
A. Prashanth, B. Satish kumar, Dr. G.Janardhana raju. (). Scheduling In Flexible Manufacturing System by Considering Two Objectives. International Journal of Research in Advent Technology,
(), 236-240. https://doi.org/- |
|
236-240 |
| 37 |
|
241-247 |
| 38 |
|
248-254 |
| 39 |
|
255-259 |
| 40 |
| Author |
K. Chandra Shekar, B. Singaravel, S. Deva Prasad, N. Venkateshwarlu |
| Paper Title |
Linear Elastic Fracture Behaviour of Glass Fiber Reinforced Polymer Matrix Composite |
| DOI |
- |
| How to Cite |
K. Chandra Shekar, B. Singaravel, S. Deva Prasad, N. Venkateshwarlu. (). Linear Elastic Fracture Behaviour of Glass Fiber Reinforced Polymer Matrix Composite. International Journal of Research in Advent Technology,
(), 260-264. https://doi.org/- |
|
260-264 |
| 41 |
| Author |
S.Surendarnath, V.Sai Prem, R. Aravind, K.Ramesh, S.Janardhan, N.Praveen Naik |
| Paper Title |
Machinability Study of AA 6082 Alloy by Turning Operation |
| DOI |
- |
| How to Cite |
S.Surendarnath, V.Sai Prem, R. Aravind, K.Ramesh, S.Janardhan, N.Praveen Naik. (). Machinability Study of AA 6082 Alloy by Turning Operation. International Journal of Research in Advent Technology,
(), 265-270. https://doi.org/- |
|
265-270 |
| 42 |
| Author |
S.Surendarnath, T.Swetha, Bhuvan Arya, B.Shiva Kumar, K.Saikumar Goud, G.Raju, M.Sairam Reddy |
| Paper Title |
An Experimental Investigation On Dry Sliding Wear Behavior Of Aa 6082 Alloy |
| DOI |
- |
| How to Cite |
S.Surendarnath, T.Swetha, Bhuvan Arya, B.Shiva Kumar, K.Saikumar Goud, G.Raju, M.Sairam Reddy. (). An Experimental Investigation On Dry Sliding Wear Behavior Of Aa 6082 Alloy. International Journal of Research in Advent Technology,
(), 271-276. https://doi.org/- |
|
271-276 |
| 43 |
| Author |
Dr. V. Chokkalingam, Praveen kumar goud.E, Nitesh Sharma, Mohanraj, MD Abdul khaleed, Y.Pavan kumar |
| Paper Title |
LPG As an Alternative Refrigerant for Refrigeration |
| DOI |
- |
| How to Cite |
Dr. V. Chokkalingam, Praveen kumar goud.E, Nitesh Sharma, Mohanraj, MD Abdul khaleed, Y.Pavan kumar. (). LPG As an Alternative Refrigerant for Refrigeration. International Journal of Research in Advent Technology,
(), 277-280. https://doi.org/- |
|
277-280 |
| 44 |
| Author |
Lakshmigalla Sunil Kumar, U.Ashok Kumar, P. Laxminarayana, P.Vivek Yadav, T.Sachindra Bhushan, P.Saikumar, B..Nagaraju |
| Paper Title |
Optimization of Process Parameters on Kerf Width & Taper Angle on En-8 Carbon Steel by Abrasive Water Jet Machining |
| DOI |
- |
| How to Cite |
Lakshmigalla Sunil Kumar, U.Ashok Kumar, P. Laxminarayana, P.Vivek Yadav, T.Sachindra Bhushan, P.Saikumar, B..Nagaraju. (). Optimization of Process Parameters on Kerf Width & Taper Angle on En-8 Carbon Steel by Abrasive Water Jet Machining. International Journal of Research in Advent Technology,
(), 281-287. https://doi.org/- |
|
281-287 |
| 45 |
| Author |
JAGILAM KUMAR CHANDRA, KRISHNA TOLI , TELKAR MAHESH, |
| Paper Title |
Design and Analysis of Chassis by Using FEA |
| DOI |
- |
| How to Cite |
JAGILAM KUMAR CHANDRA, KRISHNA TOLI , TELKAR MAHESH,. (). Design and Analysis of Chassis by Using FEA. International Journal of Research in Advent Technology,
(), 288-305. https://doi.org/- |
|
288-305 |
| 46 |
| Author |
G. Kiran Kumar, Y.Narsa Reddy, Kartik Thakur, B.Ganesh, Ch. Purnachandar |
| Paper Title |
Influence of Different Treatments on High Speed Steel |
| DOI |
- |
| How to Cite |
G. Kiran Kumar, Y.Narsa Reddy, Kartik Thakur, B.Ganesh, Ch. Purnachandar. (). Influence of Different Treatments on High Speed Steel. International Journal of Research in Advent Technology,
(), 306-310. https://doi.org/- |
|
306-310 |
| 47 |
|
311-316 |
| 48 |
| Author |
Yelamasetti Balrama, T Vishnu Vardhan, G Venkata Ramana, B Sridhar Babu, Harinadh Vemanaboina |
| Paper Title |
Effect of heat input on weld defects using X-ray radiography |
| DOI |
- |
| How to Cite |
Yelamasetti Balrama, T Vishnu Vardhan, G Venkata Ramana, B Sridhar Babu, Harinadh Vemanaboina. (). Effect of heat input on weld defects using X-ray radiography. International Journal of Research in Advent Technology,
(), 317-322. https://doi.org/- |
|
317-322 |
| 49 |
| Author |
Jammu Anu Naga Chandra Krishna Teja, Kirtiranjan Mohanty, Janga Naveen Reddy, Jammalamadaka Sai Krishna, Arun S K, P Srinivas |
| Paper Title |
Industry 4.0, India Today and Tomorrow |
| DOI |
- |
| How to Cite |
Jammu Anu Naga Chandra Krishna Teja, Kirtiranjan Mohanty, Janga Naveen Reddy, Jammalamadaka Sai Krishna, Arun S K, P Srinivas . (). Industry 4.0, India Today and Tomorrow. International Journal of Research in Advent Technology,
(), 323-329. https://doi.org/- |
|
323-329 |
| 50 |
| Author |
P.Srinivas, G.Akhil, G.Naveen, Dileep, Nikhil, Pavan |
| Paper Title |
Inverse Kinematics 2D Robot |
| DOI |
- |
| How to Cite |
P.Srinivas, G.Akhil, G.Naveen, Dileep, Nikhil, Pavan. (). Inverse Kinematics 2D Robot. International Journal of Research in Advent Technology,
(), 330-333. https://doi.org/- |
|
330-333 |
| 51 |
| Author |
P.Srinivas, P.Sharath kumar, T.Sandeep, Osman, Sameer, Srikanth |
| Paper Title |
Review Paper on Steps Climbing Robot |
| DOI |
- |
| How to Cite |
P.Srinivas, P.Sharath kumar, T.Sandeep, Osman, Sameer, Srikanth. (). Review Paper on Steps Climbing Robot. International Journal of Research in Advent Technology,
(), 334-337. https://doi.org/- |
|
334-337 |
| 52 |
| Author |
Vishnu Manikeri, Dr. G. Janardhana Raju |
| Paper Title |
Design and Analysis of a Ventilated and Slotted Disc Brake |
| DOI |
- |
| How to Cite |
Vishnu Manikeri, Dr. G. Janardhana Raju. (). Design and Analysis of a Ventilated and Slotted Disc Brake. International Journal of Research in Advent Technology,
(), 338-349. https://doi.org/- |
|
338-349 |
| 53 |
| Author |
K B G Tilak, M Sainath Reddy, Md. Salman Ahmed, Y K Saikumar Reddy, B Suman |
| Paper Title |
Examination of Process Parameters on Wire-Electro-Discharge Machining Of Hastelloy |
| DOI |
- |
| How to Cite |
K B G Tilak, M Sainath Reddy, Md. Salman Ahmed, Y K Saikumar Reddy, B Suman. (). Examination of Process Parameters on Wire-Electro-Discharge Machining Of Hastelloy. International Journal of Research in Advent Technology,
(), 350-356. https://doi.org/- |
|
350-356 |
| 54 |
| Author |
D.Sunil Kumar, N.Venkatachalapathi, B.Ramanjaneyulu, K.Sunil, B.Tulasi kumar, B .Sateesh |
| Paper Title |
Design and Fabrication of Prototype Green House For Plant Protection - A High Tunnel Application |
| DOI |
- |
| How to Cite |
D.Sunil Kumar, N.Venkatachalapathi, B.Ramanjaneyulu, K.Sunil, B.Tulasi kumar, B .Sateesh. (). Design and Fabrication of Prototype Green House For Plant Protection - A High Tunnel Application. International Journal of Research in Advent Technology,
(), 357-361. https://doi.org/- |
|
357-361 |
| 55 |
|
362-366 |
| 56 |
|
367-373 |
| 57 |
|
374-380 |
